Manually Cleaning the Loomis Safe Bill Acceptors

Follow These Steps to Manually Clean the Loomis Safe Bill Acceptors

  1. Click Log In on safe screen

  2. Enter your pin code.

  3. Select Open Vault.

  4. Then select Acceptor Maintenance Door.

  5. Turn lock and open acceptor door.

  6. Lift indicated silver locking bar and remove acceptor.

  7. Follow direction on the yellow latch to open the bill acceptor.

  8. Once opened locate the 2 white feeder wheels and remove any debris stuck to them.  (They should be completely white all the way around)

  9. After cleaning close bill acceptor and reinsert into safe.

  10. Close and lock bill acceptor vault door. 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.